GRAPHITE SPECIAL-SHAPED PARTS
Our company produces various sizes and shapes of the special-shaped graphite products, we are providing various kinds of graphite parts, such as graphite dies, mould, rods and plates, carbon bushings, graphite heaters, crucibles and other graphite compone
Features- Fine grain- Homogeneous structure- High density- Excellent thermal conductivity- High mech...
- Fine grain
- Homogeneous structure
- High density
- Excellent thermal conductivity
- High mechanical strength
- Proper electrical conductivity
- Minimum wettability to molten metals
- Hard surface and good flexural strenght
- Resistance to chemical erosion and thermal shock.
| Fine-grain Specialty Graphite FXG-1 | Fine-grain Specialty Graphite FXG-2 | ||||
| Item | Unit | Guarantee value | Typical value | Guarantee value | Typical value |
| Max grain size | mm | 0.8 | 0.8 | 0.8 | 0.8 |
| Bulk density | g/cm3 | ≥1.70 | 1.73 | ≥1.73 | 1.76 |
| Specific resistance | μΩ.m | ≤8.5 | 7.5 | ≤8.0 | 7 |
| Bending strength | MPa | ≥10.0 | 11 | ≥12.0 | 12.5 |
| Compressive strength | MPa | ≥24.0 | 27 | ≥31.0 | 34 |
| Thermal Condcutivity | W/(m.k) | ≥120 | 150 | ≥130 | 160 |
| C.T.E.(100-600) °C | 10-6/°C | ≤2.5 | 2.2 | ≤2.5 | 2.1 |
| Ash content | % | ≤0.3 | 0.09 | ≤0.3 | 0.09 |
| Item | Unit | Guarantee value | Typical value | Guarantee value | Typical value |
| Max grain size | mm | 2 | 2 | 2 | 2 |
| Bulk density | g/cm3 | ≥1.58 | 1.6 | ≥1.70 | 1.75 |
| Specific resistance | μΩ.m | ≤11.5 | 10.5 | ≤8.5 | 7.5 |
| Bending strength | MPa | ≥6.0 | 6.5 | ≥9.0 | 9.5 |
| Compressive strength | MPa | ≥18.0 | 18.5 | ≥30.0 | 31 |
| Modulus of elasticity | GPa | ≤9.3 | 7.5 | ≤12.0 | 9.5 |
| C.T.E.(100-600) °C | 10-6/°C | ≤2.5 | 2.4 | ≤2.5 | 2.3 |
| Ash content | % | ≤0.3 | 0.09 | ≤0.3 | 0.09 |
| high pure graphite | ||||
| Item | Unit | baked twice | baked three time | baked four times |
| impregnated once | impregnated twice | Impregnated three times | ||
| grain size | mm | ≤325mesh | ≤325mesh | ≤325mesh |
| Bulk density | g/cm3 | ≥1.68 | ≥1.78 | ≥1.85 |
| Specific resistance | μΩ.m | ≤14 | ≤14 | ≤13 |
| Bending strength | MPa | ≥25 | ≥40 | ≥45 |
| Compressive strength | MPa | ≥50 | ≥60 | ≥65 |
| Ash content | % | ≤0.15 | ≤0.1 | ≤0.05 |
| Item | Unit | Isostatic graphite |
| grain size | μm | 5-22 |
| Bulk density | g/cm3 | 1.75-1.85 |
| Specific resistance | μΩ.m | 10-15 |
| Bending strength | MPa | ≥40 |
| Compressive strength | MPa | ≥70 |
| Shore hardness | ≥5 | |
| C.T.E.(100-600) °C | 10-6/°C | 3.2-5.2 |
| Modulus of elasticity | GPa | 9.5-12.5 |